長尺さく孔におけるさく孔深さの影響
参考文献

1)U. S. Bureau of Mines:Drillability studies-laboratory percussive drilling,RI7300(1969)

2)U. Yamaguchi and Y. Nishimatsu:ganseki-rikigaku-nyuumon,(University of Tokyo Press,Tokyo,1991),183

3)Clark, G. B.:Principles of Rock Drilling,Colorado School of Mines Quarterly,74(1979),No.2

4)Clark, G. B.:Principles of Rock Drilling and Bit Wear Part 1,Colorado School of Mines Quarterly,77(1982),No.1

5)Schunnesson, H:Tunnels & Tunnelling,(1996),January,22-23

6)Schunnesson, H:Int. J. Rock Mech. Sci.,35(1998),711-725

7)D. Ishimaru, S. Jinbo, K. Itakura, K. Sato, M. Nakata and H. Yamaji:Proc. MMIJ Spring Meeting,(2001),258-259

8)S. Hasidume, K. Ito, M. Arakawa and S. Minagawa:Proc. JSCE Annual Meeting,(1998),Part3,246-247

9)T. Kimura, M. Yamashita and S. Nishiyama:J. Soc. Mat.,52(2003),494-499

10)T. Yamamoto, S. Shirasagi, S. Yamamoto and K. Aoki:Proc. 31th Symposium of Rock Mechanics,(2001),186-190

11)B. Lundberg: Int. J. Rock Mech. Sci. & Geomech. Abstr.,24(1987),213-222

12)Y. Mikami:Doctoral Thesis of the University of Tokyo,(1986)

13)S. Okubo:Shigen-to-Sozai,113(1997),613-618

14)S. Okubo, A. Ota and M. Akiyama:Shigen-to-Sozai,110(1994),895-901

15)S. Okubo, A. Ota and K. Fukui:Shigen-to-Sozai,111(1995),301-308

16)B. Lundberg: Int. J. Rock Mech. Sci. & Geomech. Abstr.,19(1982),229-239